Antaira Technologies’ FCU-3003-SC Series is a compact, multi-mode Gigabit media converter. The FCU-3003-SC Series will take 10/100/1000BaseT copper Ethernet and convert it to 1000BaseX fiber. The FCU-3003-SC Series features a standard SC fiber connector as well as the STP-RJ45 Ethernet connector. The copper media converter is fully compliant with IEEE 802.3z and 802.3u Fast Ethernet standards. The industrial media converter features LED diagnostics for power, activity, link, and Full/Half Duplex operations. The Antaira FCU-3003-SC Series gigabit media converter uses multimode 850NM fiber with an SC connector and is capable of communication of up to 550 meters.

FCU-3003-SC’s Key Features:

• Complies with IEEE 802.3/u/ab 10/100/1000BaseTx
• Complies with IEEE 802.3z 1000BaseFx
• Supports SC Connector
• Store and Forward Switching Architecture
• Supports 1.6Kbytes Jumbo Frame
• Supports Overload Current Protection
• Supports Power Reverse Polarity Protection
• IP30 Rugged Metal Case Design
• DIN-Rail and Wall Mount Support
• Not supported in the FCU-Rack system
• 5-Year Warranty

The post Antaira FCU-3003-SC appeared first on Maktonet.

Antaira’s LMX-0602-ST-M-T-V2 is a 6-port industrial managed Ethernet switch that is embedded with 4*10/100Tx fast Ethernet ports and 2*100Fx ST fiber connectors with multi-mode 2Km support. It is a Layer 2 full manageable Ethernet switch pre-loaded with user friendly web management console design. It supports Ring Network Redundancy function with market open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol <50ms network recovery time. The advanced network Filtering and Security functions, IGMP, VLAN, QoS, SNMP, Port lock, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control network. The Antaira LMX-0602-ST-M-T-V2 is a high performance industrial managed Ethernet switch with a compact size, IP30 rating, DIN-rail or wall mounting design, and extended operating temperature range from -40°C to 75°C. It provides high EFT and ESD protection for any industrial networking applications within Power/Utility, Water Wastewater, Oil/Gas/Mining, Factory Automation, ITS-Transportation, Security Surveillance and any other outdoor or harsh environment.

LMX-0602-ST-M-T-V2’s Key Features:

• 4*10/100Tx RJ45 Ports and 2*100Fx ST Fiber Ports with Multi-Mode 2Km
• Supports Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Supports IPv4/IPv6, and DHCP Option 66/67/82
• Supports Modbus/TCP Protocol for Device Management and Monitoring
• Configuration: Web Console, Telnet, CLI Command
• IGMP v1/v2/v3 for Multicast Traffic Filtering
• QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism
• IEEE802.1Q VLAN for Easy Network Planning
• Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
• Port Lock Function for Unauthorized Access Based on MAC Address Blocking
• Auto Warning by Exception through E-mail, Relay Output
• Support RMON Function for Efficient Network Monitoring
• Support Port Mirroring for Online Diagnostic
• Extended Operating Temperature: -40°C to 75°C
• 5-Year Warranty

The post Antaira LMX-0602-ST-M-T-V2 appeared first on Maktonet.

Antaira’s LMX-0602-ST-M-V2 is a 6-port industrial managed Ethernet switch that is embedded with 4*10/100Tx fast Ethernet ports and 2*100Fx ST fiber connectors with multi-mode 2Km support. It is a Layer 2 full manageable Ethernet switch pre-loaded with user friendly web management console design. It supports Ring Network Redundancy function with market open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol <50ms network recovery time. The advanced network Filtering and Security functions, IGMP, VLAN, QoS, SNMP, Port lock, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control network. The Antaira LMX-0602-ST-M-V2 is a high performance industrial managed Ethernet switch with a compact size, IP30 rating, DIN-rail or wall mounting design, and standard operating temperature range from -10°C to 70°C. It provides high EFT and ESD protection for any industrial networking applications within Power/Utility, Water Wastewater, Oil/Gas/Mining, Factory Automation, ITS-Transportation, Security Surveillance and any other outdoor or harsh environment.

LMX-0602-ST-M-V2’s Key Features:

• 4*10/100Tx RJ45 Ports and 2*100Fx ST Fiber Ports with Multi-Mode 2Km
• Supports Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Supports IPv4/IPv6, and DHCP Option 66/67/82
• Supports Modbus/TCP Protocol for Device Management and Monitoring
• Configuration: Web Console, Telnet, CLI Command
• IGMP v1/v2/v3 for Multicast Traffic Filtering
• QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism
• IEEE802.1Q VLAN for Easy Network Planning
• Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
• Port Lock Function for Unauthorized Access Based on MAC Address Blocking
• Auto Warning by Exception through E-mail, Relay Output
• Support RMON Function for Efficient Network Monitoring
• Support Port Mirroring for Online Diagnostic
• Standard Operating Temperature: -10°C to 70°C
• 5-Year Warranty

The post Antaira LMX-0602-ST-M-V2 appeared first on Maktonet.

The SFP-10G-M-B is designed to transmit and receive optical data over 50/125 ?m or 62.5/125 ?m multimode optical fiber. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. The Antaira SFP-10G-M-B module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The SFP-10G-M-B module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

SFP-10G-M-B’s Key Features:

• 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
• Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
• 850nm VCSEL transmitter, PIN photo-detector
• 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
• Operating case temperature: 0 to 70°C
• All-metal housing for superior EMI performance
• Low power consumption
• Advanced firmware allow customer system encryption information to be stored in transceiver
• Cost effective SFP+ solution, enables higher port densities and greater bandwidth

The post Antaira SFP-10G-M-B appeared first on Maktonet.

The SFP-10G-M-J is designed to transmit and receive optical data over 50/125 ?m or 62.5/125 ?m multimode optical fiber. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. The  Antaira SFP-10G-M-J module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The SFP-10G-M-J module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting.

SFP-10G-M-J’s Key Features:

• 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
• Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
• 850nm VCSEL transmitter, PIN photo-detector
• 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
• Operating case temperature: 0 to 70°C
• All-metal housing for superior EMI performance
• Low power consumption
• Advanced firmware allow customer system encryption information to be stored in transceiver
• Cost effective SFP+ solution, enables higher port densities and greater bandwidth

The post Antaira SFP-10G-M-J appeared first on Maktonet.

The SFP-10G-M-H is designed to transmit and receive optical data over 50/125 ?m or 62.5/125 ?m multimode optical fiber. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. The Antaira SFP-10G-M-H module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. The Antaira SFP-10G-M-H module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

 SFP-10G-M-H’s Key Features:

• 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
• Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
• 850nm VCSEL transmitter, PIN photo-detector
• 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
• Operating case temperature: 0 to 70°C
• All-metal housing for superior EMI performance
• Low power consumption
• Advanced firmware allow customer system encryption information to be stored in transceiver
• Cost effective SFP+ solution, enables higher port densities and greater bandwidth

The post Antaira SFP-10G-M-H appeared first on Maktonet.

The SFP-M-B is a high performance and cost-effective module for serial optical data communication applications specified for multimode of 1.25 Gb/s. It operates on +3.3V power. The Antaira SFP-M-B module is intended for multimode fiber, operates at a nominal wavelength of 850nm, and complies with the Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All are housed in a metal package and the combination produces a reliable component.

SFP-M-B’s Key Features:

• 850nm VCSEL
• Data Rate: 1.25Gbps, NRZ
• Single +3.3V Power Supply
• RoHS Compliant and Lead-free
• AC/AC Differential Electrical Interface
• Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
• Duplex LC Connector
• Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
• Compliance with ANSI specifications for Fiber Channel applications at 1.06 Gbps
• Eye Safety (Designed to meet Laser Class 1, complies with EN60825-1)

The post Antaira SFP-M-B appeared first on Maktonet.

Antaira Technologies FCU-3002A-WA-M is a compact multi-mode gigabit fiber to 10/100/1000 Ethernet WDM media converter. It is housed in a industrial metal case and conforms to the FCC emission standards. It features a standard SC single strand fiber connector as well as the copper STP-RJ45 Ethernet connector. This model is fully compliant with the IEEE 802.3z 1000Base-SX/LX and IEEE 802.3ab, 1000Baes-T. The FCU-3002A-WA-M features LEDs that provide indicators for Power, TP Link/ACT and Fiber Link/ACT. The Antaira FCU-3002A-WA-M is a industrial WDM media converter that operates on multi mode, single strand fiber TX:1310nm RX:1550nm capable of transmission up to 550 meters. WDM media converters are a great solution to double the bandwidth of a existing fiber network.

FCU-3002A-WA-M Key Features:

• Complies with IEEE 802.3/u/ab 10/100/1000BaseT
• Complies with IEEE 802.3z 1000BaseX
• Supports Jumbo Frame (9K bytes)
• Store-and-Forward Switching Mechanism
• Auto-Crossover for MDI/MDIX in TP Port
• Auto-Negotiation in TP Port
• Supports Flow Control
• Supports Link Alarm
• Supports Auto & Force Mode Configuration
• 5-Year Warranty

The post Antaira FCU-3002A-WA-M appeared first on Maktonet.

The SFP-100M is a high performance and cost-effective module for serial optical data communication applications specified for multimode of 155 Mb/s. It operates on +3.3V power. The Antaira SFP-100M is intended for multimode fiber, operates at a nominal wavelength of 1310nm, and complies with the Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All of are housed in a plastic package and the combination produces a reliable component.

SFP-100M’s Key Features:

• 1310nm LED/FP
• Data Rate: 155Mbps, NRZ
• Single +3.3V Power Supply
• RoHS Compliant and Lead-free
• AC/AC Differential Electrical Interface
• Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
• Duplex LC Connector
• Compliance with 100Base-FX of IEEE802.3u Standard
• Compliance with FDDI PMD Standard
• Compliance with ATM Standard

The post Antaira SFP-100M appeared first on Maktonet.

Antaira Technologies’ LNX-0602-ST-M-T switch is smart 6-port Industrial Unmanaged Ethernet Switches supporting 4-Port 10/100Tx Fast Ethernet and 2-Port 100Fx of  ST type connector and support Multi-mode in 2Km The Antaira LNX-0602-ST-M-T series switches support 12~48VDC power inputs. This series of switches offers an Extended Operating Temperature model (w/-T) which supports -40°C ~ 75°C. It supports IEEE 802.3/802.3u/802.3x with 10/100BTx, full or half duplex, MDI/MDI-X auto sensing to provide an economical solution for the Industrial Ethernet Network. In addition, the Network Broadcast Storm Protection and built-in relay warning function alerts network engineers when power failures or port breaks occur.

LNX-0602-ST-M-T’s Key Features:

• Network Broadcast Storm Protection
• 4-Port 10/100Tx Fast Ethernet
• 1-Port 100Fx ST Type Connector (Multi Mode)
• Supports Auto MDI/MDI-X Function
• Store-and-Forward Switching Architecture
• 2K MAC Address Table
• Surge Protection: 2,000 VDC Support
• ESD Protection: 6,000 VDC Support
• Redundant Power Input Design – 12~48VDC
• Built-in 1 Relay Output for Port Break Alarm
• IP30 Rugged Metal Case Design
• DIN-Rail and Wall Mount Support
• Operating Temperature Range: EOT: -40° to 75°C
• 5-Year Warranty

The post Antaira LNX-0602-ST-M-T appeared first on Maktonet.