Antaira’s LMP-0602-S3-T-V2 is a 6-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 2*100Fx SC fiber ports with optional versions for single-mode (30Km). The Antaira LMP-0602-S3-T-V2 is a fully manageable industrial Ethernet switch that supports the standard Layer 2 Ethernet configurable settings with a pre-loaded web console. This product is IP30 rated and DIN-rail mountable and supports industrial extended temperature range from -40°C to 75°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

LMP-0602-S3-T-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with
• 30W/Port and 2*100Fx Fiber Ports
• Fiber Supports: Single-Mode
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail or Wall Mountable
• Operating Temperature Range : -40° to 75°C
• 5-Year Warranty

The post Antaira LMP-0602-S3-T-V2 appeared first on Maktonet.

Antaira’s LMP-0602-S3-V2 is a 6-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 2*100Fx (SC or ST connector) fiber ports with optional versions for single-mode (30Km). The LMP-0602-S3-V2 is a fully manageable industrial Ethernet switch that supports the standard Layer 2 Ethernet configurable settings with a pre-loaded web console. This product is IP30 rated and DIN-rail mountable and provides operating temperature range models in STD: -10°C to 70°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

LMP-0602-S3-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with
• 30W/Port and 2*100Fx Fiber Ports
• Fiber Supports: Single-Mode
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail or Wall Mountable
• Operating Temperature Range : -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0602-S3-V2 appeared first on Maktonet.

Antaira’s LMP-0602-M-T-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (SC connector) fiber ports with multi-mode (2Km). The Antaira LMP-0602-M-T-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in EOT: -40°C to 75°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment. Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.

LMP-0602-M-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with 30W/Port and 2*100Fx (SC) Fiber Ports
• Fiber Supports: Multi-Mode in 2Km
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail and Wall Mountable
• Operating Temperature Range – STD: -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0602-M-T-V2 appeared first on Maktonet.

Antaira’s LMP-0602-M-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (SC connector) fiber ports with multi-mode (2Km). The Antaira LMP-0602-M-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in STD: -10°C to 70°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.

LMP-0602-M-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with 30W/Port and 2*100Fx (SC) Fiber Ports
• Fiber Supports: Multi-Mode in 2Km
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail and Wall Mountable
• Operating Temperature Range – STD: -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0602-M-V2 appeared first on Maktonet.

Antaira’s LMP-0501-S3-T-V2 series is a 5-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 1*100Fx SC fiber port with optional versions for single-mode (30Km). Antaira LMP-0501-S3-T-V2 series is a fully manageable industrial Ethernet switch pre-loaded with standard Light Layer 3 network management software, and supports a user friendly web console interface for easy configuration. This product series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

LMP-0501-S3-T-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC) Fiber Port
• Fiber Supports: Single Mode 30Km
• Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Telnet, CLI Command
• Supports IGMP v1/v2, up to 256 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• PoE Ping Alarm Function for PoE Ports Power Recycle
• System Warning Setting for Automatic Warning through E-Mail
• Redundant Power Input Design – 48~55VDC
• Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
• Operating Temperature – EOT: -40°C to 75°C
• 5-Year Warranty

The post Antaira LMP-0501-S3-T-V2 appeared first on Maktonet.

Antaira’s LMP-0501-S3-V2 series is a 5-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 1*100Fx SC fiber port with optional versions for single-mode (30Km). Antaira LMP-0501-S3-V2 series is a fully manageable industrial Ethernet switch pre-loaded with standard Light Layer 3 network management software, and supports a user friendly web console interface for easy configuration. This product series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range ( STD: -10°C to 70°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

LMP-0501-S3-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC) Fiber Port
• Fiber Supports: Single Mode 30Km
• Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Telnet, CLI Command
• Supports IGMP v1/v2, up to 256 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• PoE Ping Alarm Function for PoE Ports Power Recycle
• System Warning Setting for Automatic Warning through E-Mail
• Redundant Power Input Design – 48~55VDC
• Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
• Operating Temperature – STD: -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0501-S3-V2 appeared first on Maktonet.

Antaira Technologies’ LNP-1204G-10G-SFP are industrial gigabit PoE+ unmanaged Ethernet switches featuring 8*10/100/1000Tx Gigabit Ethernet ports that support IEEE802.3at for a maximum of 30W/port. The LNP-1204G-10G-SFP has 2*1G SFP slots and 2*10G SFP+ slots that provide options for long-distance fiber connections. These Ethernet switches are designed with high EFT and ESD protection and support standard operating temperatures from -40° to 65°C. The LNP-1204G-10G-SFP are IP30 rated and DIN-rail mountable. They also provide Ethernet connectivity with PoE functions for outdoor or harsh industrial automation application environments, such as security surveillance, ITS-traffic monitoring systems, oil/gas and mining, facility management for power/utility, water wastewater treatment plants, and lastly, automated production lines in factory automation.

Key Features:

•  Supports 8*10/100/1000Tx IEEE 802.3af/at Compliant with 30W/Port, 2*1G SFP Slots, and 2*10G SFP+ Slots
•  Store-and-Forward Switching Architecture
•  60Gbps Back-Plane (Switching Fabric)
•  16K MAC Address Table
•  10Kbytes Jumbo Frame Support
•  Redundant Power Input Design: 48~55VDC
•  Built-in 1 Relay Output for Power Failure Warning
•  IP30 Rugged Metal Case Design
•  DIN-Rail and Wall Mount Support Included
•  Operating Temperature Range: -40°C~65°C
•  5-Year Warranty

The post Antaira LNP-1204G-10G-SFP appeared first on Maktonet.

Antaira Technologies’ LMP-2602G-SFP-T series is a 26-port industrial gigabit PoE+ managed Ethernet switch featuring 24*10/100/1000Tx Ethernet ports with IEEE 802.3at high power PoE (30W/Port) and also provides 2*gigabit combo ports with 2*10/100/1000Tx RJ45 and 2*100/1000Fx SFP slots for fiber or twisted pair connections. This makes the product ideal for applications that demand high density of PoE+ port connectivity, wide bandwidth, and long-distance communication. The LMP-2602G-SFP-T series is a fully manageable, Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The LMP-2602G-SFP-T series is designed with IP40 rated 1U 19” rackmount and provides high EFT and ESD protection to prevent any unregulated voltage. . The LMP-2602G-SFP-T an operating temperature  for an extended temperature from  -40° to 75˚C and also makes it the best solution for any harsh and extreme ambient weather environment applications, such as, power/utility, transportation, water wastewater treatment plant, oil/gas, and security surveillance system industries.

  Key Features:

• 24-port 10/100/1000Tx Ethernet with IEEE 802.3at Compliant PoE+
• 2*Gigabit Combo Ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP Slots)
• System Power Input: 48~55VDC
• Built-in Relay Output Warning for Power Failure
• IP40 Rugged Metal Case Design
• Rack Mounting
• Operating Temperature Range – EOT: -40°C to 75°C
• 5-Year Warranty

The post Antaira LMP-2602G-SFP-T appeared first on Maktonet.

Antaira Technologies’ LMP-2602G-SFP series is a 26-port industrial gigabit PoE+ managed Ethernet switch featuring 24*10/100/1000Tx Ethernet ports with IEEE 802.3at high power PoE (30W/Port) and also provides 2*gigabit combo ports with 2*10/100/1000Tx RJ45 and 2*100/1000Fx SFP slots for fiber or twisted pair connections. This makes the product ideal for applications that demand high density of PoE+ port connectivity, wide bandwidth, and long-distance communication. The LMP-2602G-SFP series is a fully manageable, Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The LMP-2602G-SFP series is designed with IP40 rated 1U 19” rackmount and provides high EFT and ESD protection to prevent any unregulated voltage. . The LMP-2602G-SFP an operating temperature  for a standard temperature of -10° to 65˚C and also makes it the best solution for any harsh and extreme ambient weather environment applications, such as, power/utility, transportation, water wastewater treatment plant, oil/gas, and security surveillance system industries.

  Key Features:

• 24-port 10/100/1000Tx Ethernet with IEEE 802.3at Compliant PoE+
• 2*Gigabit Combo Ports (2*10/100/1000Tx RJ45 and 2*100/1000 SFP Slots)
• System Power Input: 48~55VDC
• Built-in Relay Output Warning for Power Failure
• IP40 Rugged Metal Case Design
• Rack Mounting
• Operating Temperature Range – STD: -10°C to 65°C
• 5-Year Warranty

The post Antaira LMP-2602G-SFP appeared first on Maktonet.

Key Features:

• Supports 6*10/100Tx (4*PoE – IEEE 802.3at/af Compliant with 30W/Port)
• Supports Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Supports IPv4/IPv6, and DHCP Option 66/67/82
• Supports Modbus/TCP Protocol for Device Management and Monitoring
• Configuration: Web Console, Telnet, CLI Command
• IGMP v1/v2 for Multicast Traffic Filtering
• QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism
• Power Input: 48~55VDC in 6-Pin Terminal Block
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail or Wall Mountable
• Operating Temperature Range:  EOT: -40° to 75°C
• 5-Year Warranty

The post Antaira LMP-0600-V2-T appeared first on Maktonet.