Industrial Network Accessories Archives - Maktonet https://maktonet.com/product-category/accessories/industrial-network-accessories/ making telecom networks Tue, 16 Jan 2024 14:46:52 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.8 https://maktonet.com/wp-content/uploads/2025/12/cropped-maktonet-favicon-32x32.png Industrial Network Accessories Archives - Maktonet https://maktonet.com/product-category/accessories/industrial-network-accessories/ 32 32 Antaira FCU-RACK-AC-PWR https://maktonet.com/product/fcu-rack-ac-pwr/ Wed, 23 Nov 2022 08:23:02 +0000 https://maktonet.com/?post_type=product&p=19047 AC Power Module For FCU-RACK-16.

 

 

The post Antaira FCU-RACK-AC-PWR appeared first on Maktonet.

]]> Introduction:

Antaira Technologies FCU-RACK-AC-PWR is a AC to DC power supply. Designed as a replacement or redundant power supply for the FCU-RACK-AC 19-in rack mountable chassis. The FCU-RACK-AC-PWR is hot swappable, preventing down time or lost communication of data between media converters.

The post Antaira FCU-RACK-AC-PWR appeared first on Maktonet.

]]> Antaira ANT-PA-2414 https://maktonet.com/product/ant-pa-2414/ Wed, 23 Nov 2022 07:16:32 +0000 https://maktonet.com/?post_type=product&p=19044 2.4~2.5 GHz Outdoor Panel Antenna 14dBi.

 

 

The post Antaira ANT-PA-2414 appeared first on Maktonet.

]]> Introduction:

Antaira Technologies ANT-PA-2414 is a directional panel antenna that can broadcast WiFi signals on the 2.4 GHz frequency. The ANT-PA-2414 is a outdoor, waterproof antenna. The 14dBi antenna has a standard female N-type connector that can be connected to most industrial wireless access points, clients, bridge or bluetooth device. The ANT-PA-2414 works with IEEE 802.11b, IEEE 802g, IEEE 802n. A N-type to SMA conversion cable is available.

Key Features:

  • Superior Performance
  • Lightweight Antenna
  • Good Appearance Designs
  • DC Short Lightning Protection
  • Installed for Vertical or Horizontal Polarization
  • Aluminum Built Support
  • Up and Down Adjustment Support
  • Outdoor Antenna for Public Hot-Spots
  • Includes Tilt and Swivel Mast Mount Brackets
  • RoHS Compliant

The post Antaira ANT-PA-2414 appeared first on Maktonet.

]]> Antaira CB-SFP+5M https://maktonet.com/product/cb-sfp5m/ Wed, 23 Nov 2022 06:50:18 +0000 https://maktonet.com/?post_type=product&p=19038 SFP+ 10GbE Direct Attach Passive Copper Cable, Male to Male, 5 Meter (16.4ft) 24AWG , Operating Temperature: 0° to 70° C

 

 

The post Antaira CB-SFP+5M appeared first on Maktonet.

]]> Introduction:

CB-SFP+5M is a Cisco compatible 10 Gigabit SFP+ direct attach passive copper cable, with male to male interface. It provides 10-Gigabit Ethernet connectivity with any SFP+ enabled port. Each SFP+ cable utilizes an integrated 20-position “board-as-connector” design with zinc die-cast backshells for superior EMI performance and minimal insertion loss. It is designed to support applications for 8 Gbps Fiber channel and 10 Gbps Gigabit Ethernet, and is backward compatible with 1 Gbps. This model’s cables are assembled with industry-leading 24 AWG, and 5 Meter (16.4ft) length cable.

Key Features:

  • Hot – Plug Swappable
  • 10G Ethernet, Fiber Channel, Multi-Platform Support
  • Low Power Consumption
  • Compliant with SFP+ MSA and SFF-8431
  • Backward Compatible to 1Gbps
  • Cost Effective Solution as Compared to Fiber Transmissions
  • Mating Application
  • 5 Meters

The post Antaira CB-SFP+5M appeared first on Maktonet.

]]> Antaira CB-SFP+4M https://maktonet.com/product/cb-sfp4m/ Wed, 23 Nov 2022 06:20:37 +0000 https://maktonet.com/?post_type=product&p=19032 SFP+ 10GbE Direct Attach Passive Copper Cable, Male to Male, 4 Meters (13.1ft) 28AWG , Operating Temperature: 0° to 70° C

 

 

The post Antaira CB-SFP+4M appeared first on Maktonet.

]]> Introduction:

CB-SFP+4M is a Cisco compatible 10 Gigabit SFP+ direct attach passive copper cable, with male to male interface. It provides 10-Gigabit Ethernet connectivity with any SFP+ enabled port. Each SFP+ cable utilizes an integrated 20-position “board-as-connector” design with zinc die-cast backshells for superior EMI performance and minimal insertion loss. It is designed to support applications for 8 Gbps Fiber channel and 10 Gbps Gigabit Ethernet, and is backward compatible with 1 Gbps. This model’s cables are assembled with industry-leading 28 AWG, and 4 Meter (13.1ft) length cable.

Key Features:

  • Hot – Plug Swappable
  • 10G Ethernet, Fiber Channel, Multi-Platform Support
  • Low Power Consumption
  • Compliant with SFP+ MSA and SFF-8431
  • Backward Compatible to 1Gbps
  • Cost Effective Solution as Compared to Fiber Transmissions
  • Mating Application
  • 4 Meters

The post Antaira CB-SFP+4M appeared first on Maktonet.

]]> Antaira CB-SFP+1M https://maktonet.com/product/cb-sfp1m/ Tue, 22 Nov 2022 13:16:38 +0000 https://maktonet.com/?post_type=product&p=19026 SFP+ 10GbE Direct Attach Passive Copper Cable, Male to Male, 1 Meter (3.3ft) 30AWG , Operating Temperature: 0° to 70° C

 

 

The post Antaira CB-SFP+1M appeared first on Maktonet.

]]> Introduction:

CB-SFP+1M is a Cisco compatible 10 Gigabit SFP+ direct attach passive copper cable, with male to male interface. It provides 10-Gigabit Ethernet connectivity with any SFP+ enabled port. Each SFP+ cable utilizes an integrated 20-position “board-as-connector” design with zinc die-cast backshells for superior EMI performance and minimal insertion loss. It is designed to support applications for 8 Gbps Fiber channel and 10 Gbps Gigabit Ethernet, and is backward compatible with 1 Gbps. This model’s cables are assembled with industry-leading 30 AWG, and 1 Meter (3.3ft) length cable.

Key Features:

  • Hot – Plug Swappable
  • 10G Ethernet, Fiber Channel, Multi-Platform Support
  • Low Power Consumption
  • Compliant with SFP+ MSA and SFF-8431
  • Backward Compatible to 1Gbps
  • Cost Effective Solution as Compared to Fiber Transmissions
  • Mating Application
  • 1 Meter

The post Antaira CB-SFP+1M appeared first on Maktonet.

]]> Antaira PARANI-SD1000U https://maktonet.com/product/parani-sd1000u/ Tue, 22 Nov 2022 11:58:49 +0000 https://maktonet.com/?post_type=product&p=19021 Bluetooth USB Adapter for Serial Port replacement, Bluetooth 2.0+EDR Class 1, 300m Working Distance, External antenna option support.

 

 

The post Antaira PARANI-SD1000U appeared first on Maktonet.

]]> Introduction:

The Sena PARANI-SD1000U is a class 1 type Bluetooth USB adapter for Serial Port Replacement that supports 300 meters of wireless transmission distance by default. The working distance can be further extended up to 1000 meters using an optional antenna that can be replaceable. It is suitable for industrial and special applications because it can cover longer communication distances (1000m) over other regular Bluetooth USB adapter accessories.

Key Features:

  • Bluetooth Specification v2.0 + EDR Class 1
  • Working distance (In an open field): Normally 300 meters, up to 1000m using patch antenna
  • USB 2.0 interface
  • Supports Windows, Linux, Mac OS and Windows CE.NET operating systems.
  • No Bluetooth driver required.
  • Provides transparent RS232 serial cable replacement for PC
  • Supports Bluetooth Serial Port Profile (SPP)
  • Supports up to 4 multiple simultaneous connections
  • Interoperability with laptops, PDA terminals etc.
  • Easy to use Windows configuration tool available.

The post Antaira PARANI-SD1000U appeared first on Maktonet.

]]> Antaira PARANI-MSP1000B https://maktonet.com/product/parani-msp1000b/ Tue, 22 Nov 2022 10:20:10 +0000 https://maktonet.com/?post_type=product&p=19018 Bluetooth To Ethernet Gateway 1-14 Connections.

 

 

The post Antaira PARANI-MSP1000B appeared first on Maktonet.

]]> Introduction:

The Sena PARANI-MSP1000B is a Bluetooth Access Point. The Sena PARANI-MSP1000B Bluetooth product is designed to manage up to 14 Bluetooth devices over 10/100 Base-T Ethernet network with advanced options. It incorporates Bluetooth 2.0 Protocol Stack with Enhanced Data Rate (EDR) support; and transmits data from each Bluetooth terminal to a management station via TCP/IP.

Key Features:

  • Connects Bluetooth devices to 10/100 base-T Ethernet
  • Dual Ethernet Interface support
  • Supports Up to 3Mbps throughput
  • Ideal wireless solution for the replacement of the wired multi-port serial card
  • Supports Bluetooth profiles for Serial Port, LAN Access, PAN, File Transfer and Dial up Networking
  • Easy-to-use COM-Port redirector support
  • Flexible TCP/UDP host mode support: Multiple host connection/data transfer
  • System logging & port buffering
  • Supports Python Script Engine for customization
  • Supports firmware upgrade via web, hyper terminal program, software or etc.
  • Supports surge protector
  • Supports RFC 2217, Telnet COM Port Control Protocol

The post Antaira PARANI-MSP1000B appeared first on Maktonet.

]]> Antaira PARANI-SD1000-B10 https://maktonet.com/product/parani-sd1000-b10/ Tue, 22 Nov 2022 07:42:52 +0000 https://maktonet.com/?post_type=product&p=19014 Bluetooth to RS-232 Converter, 10-Unit Bulk Pack, Bluetooth 2.0+EDR Class 1, (OPA, USB Power Cable, and CD are not included) ,Operating Temperature: -20° C to 70 ° C

 

 

The post Antaira PARANI-SD1000-B10 appeared first on Maktonet.

]]> Introduction:

The Sena PARANI-SD1000-B10 is a bulk order of 10 Parani-SD-1000 Bluetooth devices. The Sena PARANI-SD1000-B10 is a Class1 type of Bluetooth Serial Adapter that supports 100 meters of wireless transmit distance by default. The Sena Parani-SD1000 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports the Bluetooth v2.0+EDR specification. PARANI-SD1000-B10 has two battery-pack options, standard and extended battery pack. By these options, Sena’s  PARANI-SD1000-B10 portability is more enhanced. The PARANI-SD1000-B10 also supports up to 4 multiple simultaneous connections.

Key Features:

  • Bluetooth Specification v2.0 + EDR
  • Provides transparent RS232 serial cable replacement
  • Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm
  • Receiving Sensitivity : -88dBm(0.1%BER)
  • Supports Bluetooth profiles SPP(Serial Port Profile)
  • Interoperability with PDA, laptops etc.
  • Supports firmware upgrade via windows-based software (ParaniUpdater)
  • Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna
  • Enhanced portability : standard & extended battery pack options
  • Easy to use Windows configuration tool available.
  • No external drivers required.

The post Antaira PARANI-SD1000-B10 appeared first on Maktonet.

]]> Antaira PARANI-SD1000-A1 https://maktonet.com/product/parani-sd1000-a1parani-sd1000-a1/ Tue, 22 Nov 2022 07:30:26 +0000 https://maktonet.com/?post_type=product&p=19010 Bluetooth to RS-232 Converter, Bluetooth 2.0+EDR Class 1, No Antenna or Accessories ,Operating Temperature: -20° C to 70 ° C

 

 

The post Antaira PARANI-SD1000-A1 appeared first on Maktonet.

]]> Introduction:

The Bluetooth PARANI-SD1000-A1 is a Class1 type of Bluetooth Serial Adapter that supports 100 meters of wireless transmit distance by default. The Sena PARANI-SD1000-A1 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports Bluetooth v2.0+EDR specification. Sena PARANI-SD1000-A1 has two battery-pack options, standard and extended battery pack. By these options, Sena’s PARANI-SD1000-A1 portability is more enhanced. The Parani-SD1000 also supports up to 4 multiple simultaneous connections.

Key Features:

  • Bluetooth Specification v2.0 + EDR
  • Provides transparent RS232 serial cable replacement
  • Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm
  • Receiving Sensitivity : -88dBm(0.1%BER)
  • Supports Bluetooth profiles SPP(Serial Port Profile)
  • Interoperability with PDA, laptops etc.
  • Supports firmware upgrade via windows-based software (ParaniUpdater)
  • Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna
  • Enhanced portability : standard & extended battery pack options
  • Easy to use Windows configuration tool available.
  • No external drivers required.

The post Antaira PARANI-SD1000-A1 appeared first on Maktonet.

]]> Antaira PARANI-SD1000-01 https://maktonet.com/product/parani-sd1000-01/ Tue, 22 Nov 2022 07:06:07 +0000 https://maktonet.com/?post_type=product&p=19004 Bluetooth to RS-232 Converter, Bluetooth 2.0+EDR Class 1, Int'l DC Power Adapter Included (US/EU/UK/AU), Battery Pack Optional ,Operating Temperature: -20° C to 70 ° C

 

 

The post Antaira PARANI-SD1000-01 appeared first on Maktonet.

]]> Introduction:

The Bluetooth PARANI-SD1000-01 is a Class1 type of Bluetooth Serial Adapter that supports 100 meters of wireless transmit distance by default. The Sena PARANI-SD1000-01 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports Bluetooth v2.0+EDR specification. Sena PARANI-SD1000-01 has two battery-pack options, standard and extended battery pack. By these options, Sena’s Parani-SD1000 portability is more enhanced. The Parani-SD1000 also supports up to 4 multiple simultaneous connections.

Key Features:

  • Bluetooth Specification v2.0 + EDR
  • Provides transparent RS232 serial cable replacement
  • Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm
  • Receiving Sensitivity : -88dBm(0.1%BER)
  • Supports Bluetooth profiles SPP(Serial Port Profile)
  • Interoperability with PDA, laptops etc.
  • Supports firmware upgrade via windows-based software (ParaniUpdater)
  • Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna
  • Enhanced portability : standard & extended battery pack options
  • Easy to use Windows configuration tool available.
  • No external drivers required.

The post Antaira PARANI-SD1000-01 appeared first on Maktonet.

]]>