SFP Modules Archives - Maktonet https://maktonet.com/product-category/industrial-data-communications/sfp-modules-industrial-data-communications/ making telecom networks Tue, 16 Jan 2024 14:47:15 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.8 https://maktonet.com/wp-content/uploads/2025/12/cropped-maktonet-favicon-32x32.png SFP Modules Archives - Maktonet https://maktonet.com/product-category/industrial-data-communications/sfp-modules-industrial-data-communications/ 32 32 Antaira SFP-100S40 https://maktonet.com/product/antaira-sfp-100s40/ Sat, 14 Oct 2023 11:19:09 +0000 https://maktonet.com/?post_type=product&p=19469 155Mbps Fast Ethernet SFP Transceiver, Single Mode 40KM / LC / 1310nm, 0°C~70°C

The post Antaira SFP-100S40 appeared first on Maktonet.

]]> SFP-100S40’s Introduction:

The SFP-100S40 is a high performance and cost-effective module for serial optical data communication applications specified for single mode of 155 Mb/s. It operates on +3.3V power supply. Antaira SFP-100S40 is intended for Single-mode fiber, operates at a nominal wavelength of 1310nm and complies with the Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP).

SFP-100S40’s Key Features:

  • 1310nm FP LD
  • Data Rate: 155Mbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface ( optional )
  • Duplex LC Connector
  • Compliance with 100Base-FX of IEEE802.3u Standard
  • Compliance with FDDI PMD Standard
  • Compliance with ATM Standard

The post Antaira SFP-100S40 appeared first on Maktonet.

]]> Antaira SFP-10G-WB60-DELL https://maktonet.com/product/antaira-sfp-10g-wb60-dell/ Sun, 07 May 2023 11:23:15 +0000 https://maktonet.com/?post_type=product&p=24312 10G Fiber SFP+ Transceiver WDM-B, Single Mode 60Km / LC / TX:1330nm RX:1270nm, 0 to 70C (*** DELL Compatible ***)

The post Antaira SFP-10G-WB60-DELL appeared first on Maktonet.

]]> SFP-10G-WB60-DELL’s Introduction:

Antaira SFP-10G-WB60-DELL (DELL Compatible) is a Hot Pluggable 3.3V Small-Form-Factor transceiver module. It is designed expressly for high-speed communication applications that require data transmission rates up to 11.1Gbps. The Antaira SFP-10G-WB60-DELL is compliant with SFF-8472 and SFP+ MSA, and the module data link is up to 60Km in 9/125um single mode fiber.

SFP-10G-WB60-DELL’s Key Features:

  • 11.1Gbps Data Links
  • Up to 60km Transmission on SMF
  • Single Mode Fiber Tx:1330 Rx:1270
  • 2-Wire Interface with Integrated Digital Diagnostic Monitoring
  • EEPROM with Serial ID Functionality
  • Hot-Swappable SFP+ Design
  • Compliant with SFP+ Multi-Source Agreement
  • Single LC Connector
  • Single +3.3V Supplied Power
  • SFP-8472 Compliant
  • SFP-8431 Compliant
  • RoHS Compliant
  • Operating Temperature Range: -0° to 70° C
  • 5-Year Warranty

The post Antaira SFP-10G-WB60-DELL appeared first on Maktonet.

]]> Antaira SFP-10G-WA60-DELL https://maktonet.com/product/antaira-sfp-10g-wa60-dell/ Sun, 07 May 2023 10:50:54 +0000 https://maktonet.com/?post_type=product&p=24306 10G Fiber SFP+ Transceiver WDM-A, Single Mode 60Km / LC / TX:1270nm RX:1330nm, 0 to 70C (*** DELL Compatible ***)

The post Antaira SFP-10G-WA60-DELL appeared first on Maktonet.

]]> SFP-10G-WA60-DELL’s Introduction:

Antaira SFP-10G-WA60-DELL (DELL Compatible) is a Hot Pluggable 3.3V Small-Form-Factor transceiver module. It is designed expressly for high-speed communication applications that require data transmission rates up to 11.1Gbps. The Antaira SFP-10G-WA60-DELL is compliant with SFF-8472 and SFP+ MSA, and the module data link is up to 60Km in 9/125um single mode fiber.

SFP-10G-WA60-DELL’s Key Features:

  • 11.1Gbps Data Links
  • Up to 60km Transmission on SMF
  • Single Mode Fiber Tx:1270 Rx:1330
  • 2-Wire Interface with Integrated Digital Diagnostic Monitoring
  • EEPROM with Serial ID Functionality
  • Hot-Swappable SFP+ Design
  • Compliant with SFP+ Multi-Source Agreement
  • Single LC Connector
  • Single +3.3V Supplied Power
  • SFP-8472 Compliant
  • SFP-8431 Compliant
  • RoHS Compliant
  • Operating Temperature Range: -0° to 70° C
  • 5-Year Warranty

The post Antaira SFP-10G-WA60-DELL appeared first on Maktonet.

]]> Antaira SFP-10G-S10-J https://maktonet.com/product/antaira-sfp-10g-s10-j/ Sun, 07 May 2023 08:32:53 +0000 https://maktonet.com/?post_type=product&p=24294 10G SFP+ LR Transceiver, Single-Mode 10KM / LC / 1310nm, 0°C~70°C (**Juniper Compatible** )

The post Antaira SFP-10G-S10-J appeared first on Maktonet.

]]> SFP-10G-S10-J’s Introduction:

The SFP-10G-S10-J is designed to transmit and receive optical data over single mode optical fiber for a link length of 10km. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-LR standard. The Antaira SFP-10G-S10-J module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The SFP-10G-S10-J module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

SFP-10G-S10-J’s Key Features:

  • 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR
  • Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
  • 1310nm DFB transmitter, PIN photo-detector
  • 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
  • Operating case temperature: 0 to 70°C
  • All-metal housing for superior EMI performance
  • Low power consumption
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth

The post Antaira SFP-10G-S10-J appeared first on Maktonet.

]]> Antaira SFP-10G-M-B https://maktonet.com/product/antaira-sfp-10g-m-b/ Sun, 07 May 2023 08:01:09 +0000 https://maktonet.com/?post_type=product&p=24287 10G SFP+ SR Transceiver, Multi-Mode 300M / LC / 850nm, 0°C~70°C (**Brocade Compatible** )

The post Antaira SFP-10G-M-B appeared first on Maktonet.

]]> SFP-10G-M-B’s Introduction:

The SFP-10G-M-B is designed to transmit and receive optical data over 50/125 ?m or 62.5/125 ?m multimode optical fiber. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. The Antaira SFP-10G-M-B module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The SFP-10G-M-B module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

SFP-10G-M-B’s Key Features:

  • 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
  • Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
  • 850nm VCSEL transmitter, PIN photo-detector
  • 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
  • Operating case temperature: 0 to 70°C
  • All-metal housing for superior EMI performance
  • Low power consumption
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth

The post Antaira SFP-10G-M-B appeared first on Maktonet.

]]> Antaira SFP-10G-M-J https://maktonet.com/product/antaira-sfp-10g-m-j/ Sun, 07 May 2023 06:30:33 +0000 https://maktonet.com/?post_type=product&p=24279 10G SFP+ SR Transceiver, Multi-Mode 300M / LC / 850nm, 0°C~70°C (**HP Compatible** )

The post Antaira SFP-10G-M-J appeared first on Maktonet.

]]> SFP-10G-M-J’s Introduction:

The SFP-10G-M-J is designed to transmit and receive optical data over 50/125 ?m or 62.5/125 ?m multimode optical fiber. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. The  Antaira SFP-10G-M-J module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The SFP-10G-M-J module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting.

 

SFP-10G-M-J’s Key Features:

  • 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
  • Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
  • 850nm VCSEL transmitter, PIN photo-detector
  • 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
  • Operating case temperature: 0 to 70°C
  • All-metal housing for superior EMI performance
  • Low power consumption
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth

The post Antaira SFP-10G-M-J appeared first on Maktonet.

]]> Antaira SFP-10G-M-H https://maktonet.com/product/antaira-sfp-10g-m-h/ Sat, 06 May 2023 09:43:27 +0000 https://maktonet.com/?post_type=product&p=24272 10G SFP+ SR Transceiver, Multi-Mode 300M / LC / 850nm, 0°C~70°C (**HP Compatible** )

The post Antaira SFP-10G-M-H appeared first on Maktonet.

]]> SFP-10G-M-H’s Introduction:

The SFP-10G-M-H is designed to transmit and receive optical data over 50/125 ?m or 62.5/125 ?m multimode optical fiber. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. The Antaira SFP-10G-M-H module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. The Antaira SFP-10G-M-H module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

 SFP-10G-M-H’s Key Features:

  • 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
  • Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
  • 850nm VCSEL transmitter, PIN photo-detector
  • 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
  • Operating case temperature: 0 to 70°C
  • All-metal housing for superior EMI performance
  • Low power consumption
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth

The post Antaira SFP-10G-M-H appeared first on Maktonet.

]]> Antaira SFP-10G-WA40 https://maktonet.com/product/antaira-sfp-10g-wa40/ Tue, 02 May 2023 13:41:36 +0000 https://maktonet.com/?post_type=product&p=24260 10G Fiber SFP+ Transceiver WDM-A, Single Mode 40Km / LC / TX:1270nm RX:1330nm, 0 to 70C (*** Cisco Compatible ***)

The post Antaira SFP-10G-WA40 appeared first on Maktonet.

]]> SFP-10G-WA40’s Introduction:

Antaira SFP-10G-WA40 (Cisco Compatible) is a Hot Pluggable 3.3V Small-Form-Factor transceiver module. It is designed expressly for high-speed communication applications that require data transmission rates up to 11.1Gbps. The Antaira SFP-10G-WA40 compliant with SFF-8472 and SFP+ MSA, and the module data link is up to 40Km in 9/125um single mode fiber.

 SFP-10G-WA40’s Key Features:

  • 11.1Gbps Data Links
  • Up to 40km Transmission on SMF
  • Single Mode Fiber Tx:1270 Rx:1330
  • 2-Wire Interface with Integrated Digital Diagnostic Monitoring
  • EEPROM with Serial ID Functionality
  • Hot-Swappable SFP+ Design
  • Compliant with SFP+ Multi-Source Agreement
  • Single LC Connector
  • Single +3.3V Supplied Power
  • SFP-8472 Compliant
  • SFP-8431 Compliant
  • RoHS Compliant
  • Operating Temperature Range: -0° to 70° C
  • 5-Year Warranty

 

The post Antaira SFP-10G-WA40 appeared first on Maktonet.

]]> Antaira SFP-M-B https://maktonet.com/product/antaira-sfp-m-b/ Tue, 02 May 2023 12:58:54 +0000 https://maktonet.com/?post_type=product&p=24254 1.25 Gb/s Ethernet SFP Transceiver, Multi Mode 550M / LC / 850nm, 0°C~70°C (Brocade Compatible)

The post Antaira SFP-M-B appeared first on Maktonet.

]]> SFP-M-B’s Introduction:

The SFP-M-B is a high performance and cost-effective module for serial optical data communication applications specified for multimode of 1.25 Gb/s. It operates on +3.3V power. The Antaira SFP-M-B module is intended for multimode fiber, operates at a nominal wavelength of 850nm, and complies with the Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All are housed in a metal package and the combination produces a reliable component.

SFP-M-B’s Key Features:

  • 850nm VCSEL
  • Data Rate: 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Duplex LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fiber Channel applications at 1.06 Gbps
  • Eye Safety (Designed to meet Laser Class 1, complies with EN60825-1)

 

The post Antaira SFP-M-B appeared first on Maktonet.

]]> Antaira SFP-S60-T https://maktonet.com/product/antaira-sfp-s60-t/ Tue, 02 May 2023 12:44:06 +0000 https://maktonet.com/?post_type=product&p=24247 1.25Gbps Ethernet SFP Transceiver, Single Mode 60KM / LC / 1550nm, 0°C~70°C

The post Antaira SFP-S60-T appeared first on Maktonet.

]]> SFP-S60-T’s Introduction:

The SFP-S60-T from ANTAIRA is the high performance and cost-effective module for serial optical data communication applications specified for single mode of 1.25 Gb/s. It operates on +3.3V power. The module is intended for single mode fiber, operates at a nominal wavelength of 1550nm, and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module comes with integrated digital diagnostics functions via an I2C serial interface (optional). The Antaira SFP-S60-T module is a duplex LC connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for 1.25Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

SFP-S60-T’s Key Features:

  • 1550nm DFB LD
  • Data Rate: 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Duplex LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fiber Channel applications at 1.06 Gbps
  • Eye Safety Designed to meet Laser Class 1, complies with EN60825-1

 

The post Antaira SFP-S60-T appeared first on Maktonet.

]]>