Antaira Technologies’ LMP-2012G-SFP-T is a 20-port industrial Gigabit managed Ethernet switch that is embedded with 8*10/100/1000Tx Ethernet ports that support IEEE 802.af/at for a maximum of 30W/port and 12*100/1000 SFP slots. The LMP-2012G-SFP-T is a fully manageable light layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The Antaira LMP-2012G-SFP-T is IP30 rated and DIN-rail mountable. There are also an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance within transportation, ITS and any other outdoor or harsh environment.

LMP-2012G-SFP-T’s Key Features:

• Supports 8*10/100/1000Tx Gigabit Ethernet with IEEE 802.3af/at Compliant PoE+ (30W/Port) and 12*100/1000 SFP Slots
• Network Redundancy Support: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Supports IPv4/IPv6, and DHCP Option 66/67/82
• Supports Modbus/TCP Protocol for Device Management and Monitoring
• IGMP v1/v2 for Multicast Traffic Filtering
• QoS (IEEE 802.1p/1Q), CoS/ToS to Increase Determinism
• IEEE802.1Q VLAN for Easy Network Planning
• Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
• Auto Warning by Exception through Relay Output
• Operating Temperature Range – EOT: -40°C to 75°C
• 5-Year Warranty

The post Antaira LMP-2012G-SFP-T appeared first on Maktonet.

Antaira Technologies’ LMP-2012G-SFP is a 20-port industrial Gigabit managed Ethernet switch that is embedded with 8*10/100/1000Tx Ethernet ports that support IEEE 802.af/at for a maximum of 30W/port and 12*100/1000 SFP slots. The LMP-2012G-SFP is a fully manageable light layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The Antaira LMP-2012G-SFP is IP30 rated and DIN-rail mountable. There are also a standard temperature range (STD: -10°C to 65°C). It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance within transportation, ITS and any other outdoor or harsh environment.

LMP-2012G-SFP’s Key Features:

• Supports 8*10/100/1000Tx Gigabit Ethernet with IEEE 802.3af/at Compliant PoE+ (30W/Port) and 12*100/1000 SFP Slots
• Network Redundancy Support: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Supports IPv4/IPv6, and DHCP Option 66/67/82
• Supports Modbus/TCP Protocol for Device Management and Monitoring
• IGMP v1/v2 for Multicast Traffic Filtering
• QoS (IEEE 802.1p/1Q), CoS/ToS to Increase Determinism
• IEEE802.1Q VLAN for Easy Network Planning
• Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
• Auto Warning by Exception through Relay Output
• Operating Temperature Range – STD: -10°C to 65°C
• 5-Year Warranty

The post Antaira LMP-2012G-SFP appeared first on Maktonet.

Antaira’s LMP-0602-S3-T-V2 is a 6-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 2*100Fx SC fiber ports with optional versions for single-mode (30Km). The Antaira LMP-0602-S3-T-V2 is a fully manageable industrial Ethernet switch that supports the standard Layer 2 Ethernet configurable settings with a pre-loaded web console. This product is IP30 rated and DIN-rail mountable and supports industrial extended temperature range from -40°C to 75°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

LMP-0602-S3-T-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with
• 30W/Port and 2*100Fx Fiber Ports
• Fiber Supports: Single-Mode
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail or Wall Mountable
• Operating Temperature Range : -40° to 75°C
• 5-Year Warranty

The post Antaira LMP-0602-S3-T-V2 appeared first on Maktonet.

Antaira’s LMP-0602-S3-V2 is a 6-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 2*100Fx (SC or ST connector) fiber ports with optional versions for single-mode (30Km). The LMP-0602-S3-V2 is a fully manageable industrial Ethernet switch that supports the standard Layer 2 Ethernet configurable settings with a pre-loaded web console. This product is IP30 rated and DIN-rail mountable and provides operating temperature range models in STD: -10°C to 70°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

LMP-0602-S3-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with
• 30W/Port and 2*100Fx Fiber Ports
• Fiber Supports: Single-Mode
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail or Wall Mountable
• Operating Temperature Range : -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0602-S3-V2 appeared first on Maktonet.

Antaira’s LMP-0602-M-T-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (SC connector) fiber ports with multi-mode (2Km). The Antaira LMP-0602-M-T-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in EOT: -40°C to 75°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment. Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.

LMP-0602-M-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with 30W/Port and 2*100Fx (SC) Fiber Ports
• Fiber Supports: Multi-Mode in 2Km
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail and Wall Mountable
• Operating Temperature Range – STD: -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0602-M-T-V2 appeared first on Maktonet.

Antaira’s LMP-0602-M-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (SC connector) fiber ports with multi-mode (2Km). The Antaira LMP-0602-M-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in STD: -10°C to 70°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.

LMP-0602-M-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3af/at Compliant with 30W/Port and 2*100Fx (SC) Fiber Ports
• Fiber Supports: Multi-Mode in 2Km
• Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Serial, CLI Command
• Supports IGMP v1/v2/v3, up to 1024 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• Redundant Power Input Design: 48~55VDC
• Reverse Polarity Protection
• IP30 Protection
• DIN-Rail and Wall Mountable
• Operating Temperature Range – STD: -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0602-M-V2 appeared first on Maktonet.

Antaira’s LMP-0501-S3-T-V2 series is a 5-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 1*100Fx SC fiber port with optional versions for single-mode (30Km). Antaira LMP-0501-S3-T-V2 series is a fully manageable industrial Ethernet switch pre-loaded with standard Light Layer 3 network management software, and supports a user friendly web console interface for easy configuration. This product series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

LMP-0501-S3-T-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC) Fiber Port
• Fiber Supports: Single Mode 30Km
• Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Telnet, CLI Command
• Supports IGMP v1/v2, up to 256 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• PoE Ping Alarm Function for PoE Ports Power Recycle
• System Warning Setting for Automatic Warning through E-Mail
• Redundant Power Input Design – 48~55VDC
• Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
• Operating Temperature – EOT: -40°C to 75°C
• 5-Year Warranty

The post Antaira LMP-0501-S3-T-V2 appeared first on Maktonet.

Antaira’s LMP-0501-S3-V2 series is a 5-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 1*100Fx SC fiber port with optional versions for single-mode (30Km). Antaira LMP-0501-S3-V2 series is a fully manageable industrial Ethernet switch pre-loaded with standard Light Layer 3 network management software, and supports a user friendly web console interface for easy configuration. This product series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range ( STD: -10°C to 70°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

LMP-0501-S3-V2’s Key Features:

• Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC) Fiber Port
• Fiber Supports: Single Mode 30Km
• Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
• Configuration: Web Console, Telnet, CLI Command
• Supports IGMP v1/v2, up to 256 Groups
• Supports QoS (IEEE802.1p) and CoS/ToS
• Supports IEEE802.1Q VLAN, SNMP v1/v2c
• PoE Ping Alarm Function for PoE Ports Power Recycle
• System Warning Setting for Automatic Warning through E-Mail
• Redundant Power Input Design – 48~55VDC
• Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
• Operating Temperature – STD: -10°C to 70°C
• 5-Year Warranty

The post Antaira LMP-0501-S3-V2 appeared first on Maktonet.

Antaira Technologies’ LMX-0602-M-T-V2 series is a 6-port industrial managed Ethernet switch embedded with 4*10/100Tx Ethernet ports and 2*100Fx fiber connections. The LMX-0602-XX-V2 is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks.The LMX-0602-M-T-V2 series is IP30 rated and DIN-rail mountable. There are also two wide operating temperature models for either an extended temperature range (EOT: -40° to 75°C) . It also provides high EFT and ESD protection for industrial networking applications, such as power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh environment.

Key Features:

•  Supports 4*10/100Tx RJ45 Ports and 2*100Fx Multi-Mode 2Km Fiber Ports
•  Supports Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
•  Supports IPv4/IPv6, and DHCP Option 66/67/82
•  Supports Modbus/TCP Protocol for Device Management and Monitoring
•  Configuration: Web Console, Telnet, CLI Command
•  IGMP v1/v2 for Multicast Traffic Filtering
•  QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism
•  Redundant Power Input Design: 12~48VDC
•  Reverse Polarity Protection
•  IP30 Protection
•  DIN-Rail or Wall Mountable
•  Operating Temperature Range– EOT: -40° to 75°C
•  5-Year Warranty

The post Antaira LMX-0602-M-T-V2 appeared first on Maktonet.

Antaira’s LMX-0602-ST-M-T series is a 6-port industrial managed Ethernet switch that is embedded with 4*10/100Tx fast Ethernet ports and 2*100Fx ST type Fiber connectors to support either multi-mode (2Km).It is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The LMX-0602-ST-M-T series is compact, IP30 rated, and DIN-rail or wall mountable. There are also two wide operating temperature models for either an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh environment.

Key Features:

• 4*10/100Tx RJ45 Ports and 2*100Fx ST Fiber Ports; Multi-Mode 2Km
•  Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
•  Supports IPv4/IPv6, and DHCP Option 66/67/82
•  Supports Modbus/TCP Protocol for Device Management and Monitoring
•  Configuration: Web Console, Telnet, CLI Command
•  IGMP v1/v2 for Multicast Traffic Filtering
•  QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism
•  IEEE802.1Q VLAN for Easy Network Planning
•  Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
•  Auto Warning by Exception through E-mail, Relay Output
•  Support RMON Function for Efficient Network Monitoring
•  Support Port Mirroring for Online Diagnostic
•  5-Year Warranty

The post Antaira LMX-0602-ST-M-T appeared first on Maktonet.