ITS Archives - Maktonet https://maktonet.com/product-tag/its/ making telecom networks Tue, 16 Jan 2024 14:47:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.8 https://maktonet.com/wp-content/uploads/2025/12/cropped-maktonet-favicon-32x32.png ITS Archives - Maktonet https://maktonet.com/product-tag/its/ 32 32 Antaira LMP-2012G-SFP-T https://maktonet.com/product/antaira-lmp-2012g-sfp-t/ Sun, 18 Jun 2023 07:22:43 +0000 https://maktonet.com/?post_type=product&p=24830 20-Port Industrial Gigabit PoE+ Light Layer 3 Managed Ethernet Switch, with 8*10/100/1000Tx (30W/Port) and 12*100/1000 SFP Slots; EOT: -40°C to 75°C

The post Antaira LMP-2012G-SFP-T appeared first on Maktonet.

]]> LMP-2012G-SFP-T’s Introduction:

Antaira Technologies’ LMP-2012G-SFP-T is a 20-port industrial Gigabit managed Ethernet switch that is embedded with 8*10/100/1000Tx Ethernet ports that support IEEE 802.af/at for a maximum of 30W/port and 12*100/1000 SFP slots. The LMP-2012G-SFP-T is a fully manageable light layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The Antaira LMP-2012G-SFP-T is IP30 rated and DIN-rail mountable. There are also an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance within transportation, ITS and any other outdoor or harsh environment.

LMP-2012G-SFP-T’s Key Features:

  • Supports 8*10/100/1000Tx Gigabit Ethernet with IEEE 802.3af/at Compliant PoE+ (30W/Port) and 12*100/1000 SFP Slots
  • Network Redundancy Support: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Supports IPv4/IPv6, and DHCP Option 66/67/82
  • Supports Modbus/TCP Protocol for Device Management and Monitoring
  • IGMP v1/v2 for Multicast Traffic Filtering
  • QoS (IEEE 802.1p/1Q), CoS/ToS to Increase Determinism
  • IEEE802.1Q VLAN for Easy Network Planning
  • Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
  • Auto Warning by Exception through Relay Output
  • Operating Temperature Range – EOT: -40°C to 75°C
  • 5-Year Warranty

The post Antaira LMP-2012G-SFP-T appeared first on Maktonet.

]]> Antaira LMP-2012G-SFP https://maktonet.com/product/antaira-lmp-2012g-sfp/ Sat, 17 Jun 2023 12:04:39 +0000 https://maktonet.com/?post_type=product&p=24816 20-Port Industrial Gigabit PoE+ Light Layer 3 Managed Ethernet Switch, with 8*10/100/1000Tx (30W/Port) and 12*100/1000 SFP Slots

The post Antaira LMP-2012G-SFP appeared first on Maktonet.

]]> LMP-2012G-SFP’s Introduction:

Antaira Technologies’ LMP-2012G-SFP is a 20-port industrial Gigabit managed Ethernet switch that is embedded with 8*10/100/1000Tx Ethernet ports that support IEEE 802.af/at for a maximum of 30W/port and 12*100/1000 SFP slots. The LMP-2012G-SFP is a fully manageable light layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, port lock, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The Antaira LMP-2012G-SFP is IP30 rated and DIN-rail mountable. There are also a standard temperature range (STD: -10°C to 65°C). It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance within transportation, ITS and any other outdoor or harsh environment.

LMP-2012G-SFP’s Key Features:

  • Supports 8*10/100/1000Tx Gigabit Ethernet with IEEE 802.3af/at Compliant PoE+ (30W/Port) and 12*100/1000 SFP Slots
  • Network Redundancy Support: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Supports IPv4/IPv6, and DHCP Option 66/67/82
  • Supports Modbus/TCP Protocol for Device Management and Monitoring
  • IGMP v1/v2 for Multicast Traffic Filtering
  • QoS (IEEE 802.1p/1Q), CoS/ToS to Increase Determinism
  • IEEE802.1Q VLAN for Easy Network Planning
  • Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL
  • Auto Warning by Exception through Relay Output
  • Operating Temperature Range – STD: -10°C to 65°C
  • 5-Year Warranty

The post Antaira LMP-2012G-SFP appeared first on Maktonet.

]]> Antaira LMP-0602-S3-T-V2 https://maktonet.com/product/antaira-lmp-0602-s3-t-v2/ Sun, 28 May 2023 12:19:02 +0000 https://maktonet.com/?post_type=product&p=24669
6-Port Industrial PoE+ Managed Ethernet Switch, with 4*10/100Tx (30W/Port), and 2*100Fx SC Connector., Single-Mode 30 km. EOT: -40° ~ 75°C. (Hardware Version 2)

The post Antaira LMP-0602-S3-T-V2 appeared first on Maktonet.

]]> LMP-0602-S3-T-V2’s Introduction:

Antaira’s LMP-0602-S3-T-V2 is a 6-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 2*100Fx SC fiber ports with optional versions for single-mode (30Km). The Antaira LMP-0602-S3-T-V2 is a fully manageable industrial Ethernet switch that supports the standard Layer 2 Ethernet configurable settings with a pre-loaded web console. This product is IP30 rated and DIN-rail mountable and supports industrial extended temperature range from -40°C to 75°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

LMP-0602-S3-T-V2’s Key Features:

  • Supports 4*10/100Tx IEEE 802.3af/at Compliant with
  • 30W/Port and 2*100Fx Fiber Ports
  • Fiber Supports: Single-Mode
  • Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Serial, CLI Command
  • Supports IGMP v1/v2/v3, up to 1024 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
  • Redundant Power Input Design: 48~55VDC
  • Reverse Polarity Protection
  • IP30 Protection
  • DIN-Rail or Wall Mountable
  • Operating Temperature Range : -40° to 75°C
  • 5-Year Warranty

The post Antaira LMP-0602-S3-T-V2 appeared first on Maktonet.

]]> Antaira LMP-0602-S3-V2 https://maktonet.com/product/antaira-lmp-0602-s3-v2/ Sun, 28 May 2023 10:48:32 +0000 https://maktonet.com/?post_type=product&p=24662 6-port Industrial PoE+ Managed Ethernet Switch, with 4*10/100Tx (30W/Port), and 2*100Fx, Single-Mode 30 km. (Hardware Version 2)

The post Antaira LMP-0602-S3-V2 appeared first on Maktonet.

]]> LMP-0602-S3-V2’s Introduction:

Antaira’s LMP-0602-S3-V2 is a 6-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 2*100Fx (SC or ST connector) fiber ports with optional versions for single-mode (30Km). The LMP-0602-S3-V2 is a fully manageable industrial Ethernet switch that supports the standard Layer 2 Ethernet configurable settings with a pre-loaded web console. This product is IP30 rated and DIN-rail mountable and provides operating temperature range models in STD: -10°C to 70°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

LMP-0602-S3-V2’s Key Features:

  • Supports 4*10/100Tx IEEE 802.3af/at Compliant with
  • 30W/Port and 2*100Fx Fiber Ports
  • Fiber Supports: Single-Mode
  • Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Serial, CLI Command
  • Supports IGMP v1/v2/v3, up to 1024 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
  • Redundant Power Input Design: 48~55VDC
  • Reverse Polarity Protection
  • IP30 Protection
  • DIN-Rail or Wall Mountable
  • Operating Temperature Range : -10°C to 70°C
  • 5-Year Warranty

The post Antaira LMP-0602-S3-V2 appeared first on Maktonet.

]]> Antaira LMP-0602-M-T-V2 https://maktonet.com/product/antaira-lmp-0602-m-t-v2/ Sun, 28 May 2023 09:17:58 +0000 https://maktonet.com/?post_type=product&p=24655 6-Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch, with 4*10/100Tx (30W/Port) and 2*100Fx Multi-Mode 2Km, 48~55VDC Power Input; EOT: -40°C to 75°C; Version 2 Hardware

The post Antaira LMP-0602-M-T-V2 appeared first on Maktonet.

]]> LMP-0602-M-V2’s Introduction:

Antaira’s LMP-0602-M-T-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (SC connector) fiber ports with multi-mode (2Km). The Antaira LMP-0602-M-T-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in EOT: -40°C to 75°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment. Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.

LMP-0602-M-V2’s Key Features:

  • Supports 4*10/100Tx IEEE 802.3af/at Compliant with 30W/Port and 2*100Fx (SC) Fiber Ports
  • Fiber Supports: Multi-Mode in 2Km
  • Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Serial, CLI Command
  • Supports IGMP v1/v2/v3, up to 1024 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c
  • Redundant Power Input Design: 48~55VDC
  • Reverse Polarity Protection
  • IP30 Protection
  • DIN-Rail and Wall Mountable
  • Operating Temperature Range – STD: -10°C to 70°C
  • 5-Year Warranty

The post Antaira LMP-0602-M-T-V2 appeared first on Maktonet.

]]> Antaira LMP-0602-M-V2 https://maktonet.com/product/antaira-lmp-0602-m-v2/ Sun, 28 May 2023 08:03:25 +0000 https://maktonet.com/?post_type=product&p=24648 6-Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch, with 4*10/100Tx (30W/Port) and 2*100Fx Multi-Mode 2Km, 48~55VDC Power Input; Version 2 Hardware

The post Antaira LMP-0602-M-V2 appeared first on Maktonet.

]]> LMP-0602-M-V2’s Introduction:

Antaira’s LMP-0602-M-V2 is a 6-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3af/at for a maximum of 30 watts per port and 2*100Fx (SC connector) fiber ports with multi-mode (2Km). The Antaira LMP-0602-M-V2 is a fully manageable industrial Ethernet switch that supports the standard light layer 3 Ethernet configurable settings with a pre-loaded web console. This switch is IP30 rated and DIN-rail mountable and provides operating temperature range model in STD: -10°C to 70°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.

Version 2 hardware is compatible with the latest light layer 3 firmware which permits static routes between VLANs.

LMP-0602-M-V2’s Key Features:

  • Supports 4*10/100Tx IEEE 802.3af/at Compliant with 30W/Port and 2*100Fx (SC) Fiber Ports
  • Fiber Supports: Multi-Mode in 2Km
  • Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Serial, CLI Command
  • Supports IGMP v1/v2/v3, up to 1024 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c
  • Redundant Power Input Design: 48~55VDC
  • Reverse Polarity Protection
  • IP30 Protection
  • DIN-Rail and Wall Mountable
  • Operating Temperature Range – STD: -10°C to 70°C
  • 5-Year Warranty

The post Antaira LMP-0602-M-V2 appeared first on Maktonet.

]]> Antaira LMP-0501-S3-T-V2 https://maktonet.com/product/antaira-lmp-0501-s3-t-v2/ Sun, 28 May 2023 07:46:52 +0000 https://maktonet.com/?post_type=product&p=24641

5-Port Industrial PoE+ Managed Ethernet Switch with 4*10/100Tx (30W/Port), and 1*100Fx Single Mode 30Km, EOT: -40°C to 75°C - Version 2 Hardware

The post Antaira LMP-0501-S3-T-V2 appeared first on Maktonet.

]]> LMP-0501-S3-T-V2’s Introduction:

Antaira’s LMP-0501-S3-T-V2 series is a 5-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 1*100Fx SC fiber port with optional versions for single-mode (30Km). Antaira LMP-0501-S3-T-V2 series is a fully manageable industrial Ethernet switch pre-loaded with standard Light Layer 3 network management software, and supports a user friendly web console interface for easy configuration. This product series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

LMP-0501-S3-T-V2’s Key Features:

  • Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC) Fiber Port
  • Fiber Supports: Single Mode 30Km
  • Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Telnet, CLI Command
  • Supports IGMP v1/v2, up to 256 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c
  • PoE Ping Alarm Function for PoE Ports Power Recycle
  • System Warning Setting for Automatic Warning through E-Mail
  • Redundant Power Input Design – 48~55VDC
  • Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
  • Operating Temperature – EOT: -40°C to 75°C
  • 5-Year Warranty

The post Antaira LMP-0501-S3-T-V2 appeared first on Maktonet.

]]> Antaira LMP-0501-S3-V2 https://maktonet.com/product/antaira-lmp-0501-s3-v2/ Sat, 27 May 2023 13:42:38 +0000 https://maktonet.com/?post_type=product&p=24634

5-Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch with 4*10/100Tx (30W/Port), and 1*100Fx Single Mode 30Km - V2 Hardware Version

The post Antaira LMP-0501-S3-V2 appeared first on Maktonet.

]]> LMP-0501-S3-V2’s Introduction:

Antaira’s LMP-0501-S3-V2 series is a 5-port industrial PoE+ Light Layer 3 managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 1*100Fx SC fiber port with optional versions for single-mode (30Km). Antaira LMP-0501-S3-V2 series is a fully manageable industrial Ethernet switch pre-loaded with standard Light Layer 3 network management software, and supports a user friendly web console interface for easy configuration. This product series is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range ( STD: -10°C to 70°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

LMP-0501-S3-V2’s Key Features:

  • Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC) Fiber Port
  • Fiber Supports: Single Mode 30Km
  • Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Telnet, CLI Command
  • Supports IGMP v1/v2, up to 256 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c
  • PoE Ping Alarm Function for PoE Ports Power Recycle
  • System Warning Setting for Automatic Warning through E-Mail
  • Redundant Power Input Design – 48~55VDC
  • Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
  • Operating Temperature – STD: -10°C to 70°C
  • 5-Year Warranty

The post Antaira LMP-0501-S3-V2 appeared first on Maktonet.

]]> Antaira SFP-WB80 https://maktonet.com/product/sfp-wb80/ Sat, 03 Dec 2022 13:33:56 +0000 https://maktonet.com/?post_type=product&p=19372 1.25G Gigabit SFP Transceiver WDM-B, SM/LC/80KM/24.0dB/TX:1550nm RX:1490nm, 0°C~70°C.

The post Antaira SFP-WB80 appeared first on Maktonet.

]]> Introduction:

The SFP-WB80 is the high performance and cost-effective module for serial optical data communication applications specified for single mode of multi-rate from 125M to 1.25 Gb/s. It operates with +3.3V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1550nm / Rx: 1490nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly. All of them are housed in a metal package and the combination produces a reliable component. The module is a single fiber connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for 1.25Gb/s long reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Key Features:

  • 1510nm DFB LD
  • Multi Data Rate: from 125M to 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gbps
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

The post Antaira SFP-WB80 appeared first on Maktonet.

]]> Antaira SFP-WB-M https://maktonet.com/product/sfp-wb-m/ Sat, 03 Dec 2022 12:58:48 +0000 https://maktonet.com/?post_type=product&p=19375 1.25G Gigabit SFP Transceiver WDM-B, MM/LC/550M/TX:1550nm RX:1310nm, 0°C~70°C.

The post Antaira SFP-WB-M appeared first on Maktonet.

]]> Introduction:

The SFP-WB-M is the high performance and cost-effective module for serial optical data communication applications specified for multimode of multi-rate from 125M to 1.25 Gb/s. It operates with +3.3V power supply. The module is intended for multimode fiber, operates at a nominal wavelength of Tx: 1550nm / Rx: 1310nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a metal package and the combination produces a reliable component. The module is a multimode fiber connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for 1.25Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Key Features:

  • 1550nm FP LD
  • Multi Data Rate: from 125M to 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gbps
  • Eye Safety
  • Designed to meet Laser Class 1 comply with EN60825-1

The post Antaira SFP-WB-M appeared first on Maktonet.

]]>