Ethernet Archives - Maktonet https://maktonet.com/product-tag/ethernet/ making telecom networks Tue, 16 Jan 2024 14:47:44 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.8 https://maktonet.com/wp-content/uploads/2025/12/cropped-maktonet-favicon-32x32.png Ethernet Archives - Maktonet https://maktonet.com/product-tag/ethernet/ 32 32 Antaira EVC-3101 https://maktonet.com/product/antaira-evc-3101/ Mon, 05 Dec 2022 07:05:43 +0000 https://maktonet.com/?post_type=product&p=19588 Ethernet over VDSL2 Converter - 1*10/100/1000Tx + 1*VDSL2/RJ11, 1*Phone - 30a

The post Antaira EVC-3101 appeared first on Maktonet.

]]> EVC-3101’s Introduction:

Antaira Technologies’ EVC-3101 is an Ethernet-over-VDSL2 converter with high performance. It is designed based on two core networking technologies: Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers the absolute fastest data transmission speeds over existing copper telephone lines without the need of rewiring. The Antaira  EVC-3101 supports ultra-high performance to the pervasive telephone line network with up to 200/160Mbps symmetric data rate within 300m and 28/12Mbps for 1.4km long-range connections.
Via the latest VDSL2 technology, EVC-3101 offers very high-performance access to Internet – up to 160Mbps for upstream and 200Mbps for downstream data transmission. With integrated support for the ITU-T’s new G.993.5 Vectoring technology, the EVC-3101 works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper infrastructure.The EVC-3101 is also a Long Reach Ethernet (LRE) converter which provides one RJ45 Ethernet port and one RJ11 phone jack. The one RJ11 phone jack is for VDSL2 connection. The splitter provided with the EVC-3101 can assist in extending Ethernet using VDSL2 over the same wires as a POTS (Plain Old Telephone Service). The splitter is used to connect to the rj11 wall jack then connecting a phone to one port and the EVC-3101 to the other effectively splitting the POTS line from the VDSL2 circuit. This makes the EVC-3101 an ideal product for extending a network over existing POTS lines.

EVC-3101’s Key Features:

  • CO/CPE mode selectable via DIP switch
  • 1*RJ11 connector for VDSL port with VDSL connection
  • Compact design VDSL2 Profile 30a CO/CPE bridge solution
  • 1*10/100/1000Base-Tx LAN port
  • Supports voice and data transmission simultaneously
  • VDSL2 standalone transceiver for simple bridge modem application
  • Defines Asymmetric (Plan 998) band and Symmetric (Plan 997) band plans for transmission of upstream and downstream signals
  • DMT (Discrete Multi-Tone) line coding
  • Selectable target band plan and target SNR margin
  • Supports up to 9K bytes packet size IEEE 802.1Q VLAN tag transparent
  • Support extensive LED indicators for network diagnostics
  • Compatible with Antaira Media Chassis (FCU-RACK16 series)
  • 2-Year Warranty

The post Antaira EVC-3101 appeared first on Maktonet.

]]> Antaira SFP-WB80 https://maktonet.com/product/sfp-wb80/ Sat, 03 Dec 2022 13:33:56 +0000 https://maktonet.com/?post_type=product&p=19372 1.25G Gigabit SFP Transceiver WDM-B, SM/LC/80KM/24.0dB/TX:1550nm RX:1490nm, 0°C~70°C.

The post Antaira SFP-WB80 appeared first on Maktonet.

]]> Introduction:

The SFP-WB80 is the high performance and cost-effective module for serial optical data communication applications specified for single mode of multi-rate from 125M to 1.25 Gb/s. It operates with +3.3V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1550nm / Rx: 1490nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly. All of them are housed in a metal package and the combination produces a reliable component. The module is a single fiber connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for 1.25Gb/s long reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Key Features:

  • 1510nm DFB LD
  • Multi Data Rate: from 125M to 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gbps
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

The post Antaira SFP-WB80 appeared first on Maktonet.

]]> Antaira SFP-WB-M https://maktonet.com/product/sfp-wb-m/ Sat, 03 Dec 2022 12:58:48 +0000 https://maktonet.com/?post_type=product&p=19375 1.25G Gigabit SFP Transceiver WDM-B, MM/LC/550M/TX:1550nm RX:1310nm, 0°C~70°C.

The post Antaira SFP-WB-M appeared first on Maktonet.

]]> Introduction:

The SFP-WB-M is the high performance and cost-effective module for serial optical data communication applications specified for multimode of multi-rate from 125M to 1.25 Gb/s. It operates with +3.3V power supply. The module is intended for multimode fiber, operates at a nominal wavelength of Tx: 1550nm / Rx: 1310nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a metal package and the combination produces a reliable component. The module is a multimode fiber connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for 1.25Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Key Features:

  • 1550nm FP LD
  • Multi Data Rate: from 125M to 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gbps
  • Eye Safety
  • Designed to meet Laser Class 1 comply with EN60825-1

The post Antaira SFP-WB-M appeared first on Maktonet.

]]> Antaira SFP-10G-WA10 https://maktonet.com/product/sfp-10g-wa10/ Fri, 02 Dec 2022 11:56:50 +0000 https://maktonet.com/?post_type=product&p=19399 10G Fiber SFP+ Transceiver WDM-A, Single Mode 10Km / LC / TX:1270nm RX:1330nm, 0 to 70C (*** Cisco Compatible ***)

The post Antaira SFP-10G-WA10 appeared first on Maktonet.

]]> Introduction:

Antaira SFP-10G-WA10 (Cisco Compatible) is a Hot Pluggable 3.3V Small-Form-Factor transceiver module. It is designed expressly for high-speed communication applications that require data transmission rates up to 11.1Gbps. It is compliant with SFF-8472 and SFP+ MSA, and the module data link is up to 10Km in 9/125um single mode fiber.

Key Features:

  • 11.1Gbps Data Links
  • Up to 10km Transmission on SMF
  • Single Mode Fiber Tx:1270 Rx:1330
  • 2-Wire Interface with Integrated Digital Diagnostic Monitoring
  • EEPROM with Serial ID Functionality
  • Hot-Swappable SFP+ Design
  • Compliant with SFP+ Multi-Source Agreement
  • Single LC Connector
  • Single +3.3V Supplied Power
  • SFP-8472 Compliant
  • SFP-8431 Compliant
  • RoHS Compliant
  • Operating Temperature Range: -0° to 70° C
  • 5-Year Warranty

The post Antaira SFP-10G-WA10 appeared first on Maktonet.

]]> Antaira XFP-10G-S40 https://maktonet.com/product/xfp-10g-s40/ Fri, 02 Dec 2022 11:12:34 +0000 https://maktonet.com/?post_type=product&p=19386 10G Ethernet XFP Transceiver, Single-Mode 40kM / LC / 1550nm, 0°C~70°C.

The post Antaira XFP-10G-S40 appeared first on Maktonet.

]]> Introduction:

The XFP-10G-S40 is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The XFP-10G-S40 converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with XFI specification and allows FR4 host PCB trace up to 200mm.

Key Features:

  • 10Gb/s serial optical interface compliant to 802.3ae, 10GBASE ER/EW
  • Uncooled 1550nm EML transmitter with TEC, Pin photo-detector
  • XFP Mechanical interface with bail latch and hot pluggable
  • XFI High Speed Electrical Interface
  • 2-wire interface for management and digital diagnostic monitor
  • Operating case temperature: 0 to 70 °C
  • All-metal housing for superior EMI performance
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • RoHS Compliant
  • No reference clock needed

The post Antaira XFP-10G-S40 appeared first on Maktonet.

]]> Antaira XFP-10G-S10 https://maktonet.com/product/xfp-10g-s10/ Fri, 02 Dec 2022 11:04:40 +0000 https://maktonet.com/?post_type=product&p=19384 10G XFP LR Transceiver, Single-Mode 10KM / LC / 1310nm, 0°C~70°C (*** Cisco Compatible ***).

The post Antaira XFP-10G-S10 appeared first on Maktonet.

]]> Introduction:

The XFP-10G-S10 is a very compact 10Gb/s optical transceiver module for serial optical communication applications at 10Gb/s. The XFP-10G-S10 converts a 10Gb/s serial electrical data stream to 10Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10Gb/s electrical interface is fully compliant with XFI specification and allows FR4 host PCB trace up to 200mm.

Key Features:

  • 10Gb/s serial optical interface compliant to 802.3ae
  • Uncooled 1310nm DFB transmitter and Pin photodiode receiver
  • XFP Mechanical interface with bail latch and hot pluggable
  • XFI High Speed Electrical Interface
  • 2-wire interface for management and digital diagnostic monitor
  • Low Power Consumption, Single +3.3V Power supply
  • Operating case temperature: 0 to 70 °C
  • All-metal housing for superior EMI performance
  • Advanced firmware allow customer system encryption information to be stored in transceiver

The post Antaira XFP-10G-S10 appeared first on Maktonet.

]]> Antaira SFP-WB-M-H https://maktonet.com/product/sfp-wb-m-h/ Fri, 02 Dec 2022 10:50:51 +0000 https://maktonet.com/?post_type=product&p=19382 1.25G Gigabit SFP Transceiver WDM-B, MM/LC/550M/TX:1550nm RX:1310nm, 0°C~70°C (**HP Compatible** ).

The post Antaira SFP-WB-M-H appeared first on Maktonet.

]]> Introduction:

The SFP-WB-M is the high performance and cost-effective module for serial optical data communication applications specified for multimode of multi-rate from 125M to 1.25 Gb/s. It operates with +3.3V power supply. The module is intended for multimode fiber, operates at a nominal wavelength of Tx: 1550nm / Rx: 1310nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a metal package and the combination produces a reliable component. The module is a multimode fiber connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for 1.25Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Key Features:

  • 1550nm FP LD
  • Multi Data Rate: from 125M to 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gbps
  • Eye Safety
  • Designed to meet Laser Class 1 comply with EN60825-1

The post Antaira SFP-WB-M-H appeared first on Maktonet.

]]> Antaira SFP-M-H https://maktonet.com/product/sfp-m-h/ Fri, 02 Dec 2022 10:39:04 +0000 https://maktonet.com/?post_type=product&p=19380 1.25 Gb/s Ethernet SFP Transceiver, Multi Mode 550M / LC / 850nm, 0°C~70°C (HP Procurve Compatible).

The post Antaira SFP-M-H appeared first on Maktonet.

]]> Introduction:

The SFP-M-H is a high performance and cost-effective module for serial optical data communication applications specified for multimode of 1.25 Gb/s. It operates on +3.3V power. The module is intended for multimode fiber, operates at a nominal wavelength of 850nm, and complies with the Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All are housed in a metal package and the combination produces a reliable component.

Key Features:

  • 850nm VCSEL
  • Data Rate: 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Duplex LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fiber Channel applications at 1.06 Gbps
  • Eye Safety (Designed to meet Laser Class 1, complies with EN60825-1)

The post Antaira SFP-M-H appeared first on Maktonet.

]]> Antaira SFP-C1 https://maktonet.com/product/sfp-c1/ Fri, 02 Dec 2022 10:17:18 +0000 https://maktonet.com/?post_type=product&p=19378 1000BASE-T Copper Ethernet SFP Transceiver 0°C~70°C (LNX/LMP Compatible).

The post Antaira SFP-C1 appeared first on Maktonet.

]]> Introduction:

The SFP-C1 Copper Small Form Pluggable (SFP) transceivers are a high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3-2002 and IEEE 802.3ab, which supports 1000Mbps data-rate up to 100 meters over unshielded twisted-pair category 5 cable. The module supports 1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation ( PAM ) signals. All four pairs in the cable are used with a 250Mbps signal rate on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed by the address of A0h via the 2 wire serial CMOS EEPROM protocol. The physical IC can also be accessed via a 2 wire serial bus at address A0h

Key Features:

  • Up to 1.25Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • Extended temperature range ( 0°C to +70°C )
  • Metallic enclosure for low EMI
  • Low power dissipation ( 1.05 W typical )
  • Compact RJ-45 connector assembly
  • Access to physical layer IC via 2-wire serial bus
  • 1000Mbps compliant in host systems with SGMII interface

The post Antaira SFP-C1 appeared first on Maktonet.

]]> Antaira SFP-WA-M-H https://maktonet.com/product/sfp-wa-m-h/ Fri, 02 Dec 2022 09:38:32 +0000 https://maktonet.com/?post_type=product&p=19377 1.25G Gigabit SFP Transceiver WDM-A, MM/LC/550M/TX:1310nm RX:1550nm, 0°C~70°C (**HP Compatible**).

The post Antaira SFP-WA-M-H appeared first on Maktonet.

]]> Introduction:

The SFP-WA-M-H is the high performance and cost-effective module for serial optical data communication applications specified for multimode of multi-rate from 125M to 1.25 Gb/s. It operates with +3.3V power supply. The module is intended for multimode fiber, operates at a nominal wavelength of Tx: 1310nm / Rx: 1550nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a metal package and the combination produces a reliable component. The module is a multimode fiber connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for 1.25Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Key Features:

  • 1310nm FP LD
  • Multi Data Rate: from 125M to 1.25Gbps, NRZ
  • Single +3.3V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gbps
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gbps
  • Eye Safety
  • Designed to meet Laser Class 1 comply with EN60825-1

The post Antaira SFP-WA-M-H appeared first on Maktonet.

]]>